Jetink 30154
Product description:
Ink for InkJet printers. Non - transfer and excellent adhesion with
post heat cure.
Ionic Ink for Printing on Silicone
Ionic ink for printing on silicone produced by FARBWERKE HERKULA SA/AG, which can also be used on metals, plastics, and absorbent materials.
FARBWERKE HERKULA SA/AG began developing ink for continuous inkjet (CIJ) printers moved by the ever-increasing demands from customers seeking better coloring performance.
FARBWERKE HERKULA SA/AG's specialization with inks enabled the development of a dedicated product line with excellent performance in adhesion, contrast and parameter stability.
Pigmented products, in particular, are characterized by low dye sedimentation and thus consistent performance. For this reason, several CIJ series have been developed: MEK-based and MEK-free series.
Most series are available either dye-based (dye based) or pigment-based (pigment based). The main focus of our inks is on extrusion applications. Therefore, we have designed several series for PVC, polyolefin, PTFE and even silicone substrates.
The main focus of all inks is on extrusion applications. Therefore, several series have been designed for PVC, polyolefin, PTFE, and even silicone substrates.
Description and Application
FARBWERKE HERKULA SA/AG's JetInk 30154 ink, designed for use on silicone, can also be used on metals, plastics, and absorbent materials.
For optimum printing results, printers with ink care mode (ink care mode) need not be used.
Good adhesion properties on silicone and metals. Heat treatment after printing significantly improves adhesion (>200°C). It is preferable to print after extrusion before curing the cable.
For proper preparation and use, it is recommended to shake the container vigorously before use, making sure there is no residue at the bottom.
JetInk 30154 ink is suitable for print nozzles from 40 to 70 µm and frequencies from 60 to 130 kHz.
All FARBWERKE HERKULA SA/AG inks for InkJet printers contain no aromatic solvents.
Chemical and Mechanical Properties
JetInk 30154 ink is available dye base or pigment base; solvent is MEK base.
Our product shows resistance to “bleeding” and no influence on the electrical characteristics of the cable.
Pigments are free of lead, other heavy metals and halogens.
The ink in this series of FARBWERKE HERKULA SA/AG also shows excellent lightfastness, very fast drying time and excellent chemical resistance after curing.
In addition, it is non-transferable and alcohol resistant.
Request More Information
Mohwinckel has been operating in the cable industry market for more than a century.
Mohwinckel has been the official distributor in Italy of inks, paints and thinners produced by FARBWERKE HERKULA SA/AG for 50 years. The Herkula inks we market include 3 different lines: Marcablo, Fibrecoat and InkJet.
Contact us to get more information and a quote.